Main station|Member Center|Save the desktop|Mobile browsing
Ordinary Member

Qingyuan Aimen Chemical Co., Ltd.

sell
  • There is no classification
contact
  • Contact:陈禹舜
  • Phone:0763-6986977
  • Email:1074744545@qq.com
  • fax:0763-3350487
search
 
link
  • There is no link yet
home > sell > JVIAY series instrument nameplate ink, flat ink and matte ink
JVIAY series instrument nameplate ink, flat ink and matte ink
products: Views:8JVIAY series instrument nameplate ink, flat ink and matte ink 
brand: HSFGY
price: 面议
MOQ:
Total supply:
Delivery date: Shipped within 3 days from the date of payment by the buyer
Valid until: Long-term validity
Last updated: 2016-05-16 18:12
 
Details
Series instrument nameplate ink
Series ink is a cheap volatile drying ink specially developed for printing on industrial meter plates and nameplates made of polycarbonate () material. This ink is a high-quality ink with high performance and low price.
Recommended applications: printing of automotive letter boards made of polycarbonate () and acrylic resin materials, printing of industrial meter boards, nameplates, etc., as well as printing of B, soft and hard materials, wood products, etc.
Features: Will not crack the material, has excellent adhesion, excellent workability, will not spread ink, will not shrink and have good flexibility, good adaptability to post-processing such as drilling, oil resistance, alcohol resistance Excellent performance and chemical resistance.
Usage: Please use a series of special dilution solvents (standard, slow drying, extra slow drying). When printing fine lines, please use a special slow-drying solvent. Polycarbonate (polycarbonate) is prone to cracking with other diluents. . Use a clean cloth with no edges and apply the treatment liquid to wipe the surface of the plastic film. This can effectively remove the grease and dirt on the surface and has no effect on the plastic film itself.
Drying properties: The solvent used is diluted and then printed on. The finger touch time at room temperature is as follows:
Standard solvent: about 1 minute, slow drying solvent: about 1 minute, extra slow drying solvent: about 1 minute, special cracking and slow drying. Solvent: about 3 minutes
Note: In order to prevent the residual solvent from causing bad odors when printing on automotive letter boards and industrial meter boards, it is recommended to heat and dry at a temperature above ℃.
Cleaning of the screen: Please use cleaning solvent to wipe and clean the screen. Color packaging: More than 10 colors to choose from, each canned.
Special reminder: The technical parameters in this information were measured under the conditions of our company. However, since the conditions and methods of using our products are beyond our control, we cannot guarantee or guarantee the technical parameters and suggestions provided, and our company is not responsible for possible losses and damages. Users are requested to conduct necessary tests before use.
Series flat ink
The series is a new product formulated with high-quality pigments. It has fine coloring power, flatness, strong adhesion and special weather and dust resistance. The ink contains an appropriate amount of special solvent, which has a strong effect on solvent-sensitive materials. The ink has good resistance to physical effects and chemical agents such as gasoline, lipids, benzene, ketones, cyclic hydrocarbons, water vapor and detergents, and meets the requirements of major European household goods and automobile manufacturers.
Recommended applications: Suitable for a variety of different materials, B, acrylic, plastic rigid plastic, synthetic paper, etc.
Features: Excellent adhesion, anti-adhesion and printability, fine ink, strong tinting power, high density, flat film layer, no touch, does not affect subsequent processing, scratch resistance and friction resistance It has good toughness and malleability, can be cut and stamped, is resistant to stretching and folding, is resistant to many solvents, and has good physical and chemical resistance.
Usage: Before printing, use a clean cloth without edges and dip it in the treatment liquid to wipe the surface of the substrate. The treatment liquid can effectively remove grease and dirt on the surface without affecting the substrate itself. , before printing, add 3-thinning solution and stir thoroughly. If slow drying is required, it can be used with a special slow drying agent. Suitable for mesh to.
Drying time: Oven drying: to minutes Air drying: to 3 minutes
Screen cleaning: Clean solvent can effectively wash away the ink on the mesh, and it also has environmental protection effects. Standard colors: More than 10 colors to choose from, each package.
Special reminder: The technical parameters in this information were measured under the conditions of our company. However, since the conditions and methods of using our products are beyond our control, we cannot guarantee or guarantee the technical parameters and suggestions provided, and our company is not responsible for possible losses and damages. Users are requested to conduct necessary tests before use.
Series of leather-like or tactile matte inks
Series are single-component screen printing inks that can be used on plastic materials. It is formulated with high-quality pigments and has excellent hiding properties and special weather resistance. It can withstand outdoor exposure. The ink series only has a matte finish and contains an appropriate amount of solvent. Therefore, it can be screen printed on materials that are particularly sensitive to solvents. . Resistant to chemical agents such as petrol, ethanol, water vapor and detergents, meeting the requirements of major European household and automotive manufacturers.
Recommended uses: B,,,, acrylic cardboard and other plastic materials
Features: Smooth printing surface, excellent wear resistance, good solvent release, excellent adhesion and anti-sticking properties It has good printability, excellent hiding power, fine ink layer, clear dots and full layers.
How to use: Before printing, use a clean cloth without edges and dipped in treatment liquid to wipe the surface of the substrate. This can remove any dirt and grease that hinders the adhesion of the ink. The treatment liquid can effectively remove grease and dirt on the surface without affecting the substrate itself. , before printing, add 3-thinning solution and stir thoroughly. If slow drying is required, it can be used with a special slow drying agent. Suitable for mesh to.
Drying time: Oven drying: to minutes Air drying: to 3 minutes
Screen cleaning: Clean solvent can effectively wash away the ink on the mesh, and it also has environmental protection effects. Standard colors: More than 10 colors to choose from, each package.
Special reminder: The technical parameters in this information were measured under the conditions of our company. However, since the conditions and methods of using our products are beyond our control, we cannot guarantee or guarantee the technical parameters and suggestions provided, and our company is not responsible for possible losses and damages. Users are requested to conduct necessary tests before use.
Request for quotation
A total of0articles  Related Comments: