Series of high-temperature metallic glass ceramic inks
Series of high-temperature metallic glass ceramic inks. This ink has extraordinary performance on metal, glass, and ceramic surfaces. It has extremely strong adhesion and is resistant to physical effects or chemical reagents, such as heat, water vapor, oil, etc. It has strong resistance and abrasion resistance to solvents, acids, salts, detergents, bleaches and a variety of dry cleaners, and can be cut, bent, drilled and punched without cracks or scratches.
Recommended uses: glass, ceramics, brass, iron sheets, stainless steel, etc.
Features:, single-component system packaging, excellent printing performance and hiding power, chemical solvent resistance, physical resistance, bending resistance and It has good impact and friction resistance and has good bonding force with most metals, glass, ceramics and materials with epoxy coating on the surface.
How to use: Before printing, use a dry cloth dipped in treatment liquid to wipe the surface of the substrate. This can remove any dirt and grease that hinders the adhesion of the ink. The treatment liquid can effectively remove grease and dirt on the surface without affecting the substrate itself. , before printing, add 3- dilution solution and stir thoroughly. If slow drying is required, special slow drying agent can be used. Suitable for mesh to.
Drying method: Automatically hardens when the temperature is higher than ℃. It is mainly suitable for baking on stoves and ovens. The ink will harden to form a film. The time is ℃-℃ for about - minutes.
Screen cleaning: Clean solvent can effectively wash away the ink on the screen, and it also has an environmental protection effect.
Standard colors: More than one color to choose from, each packaged.
Special reminder: The technical parameters in this information were measured under the conditions of our company. However, since the conditions and methods of using our products are beyond our control, we cannot guarantee or guarantee the technical parameters and suggestions provided, and our company is not responsible for possible losses and damages. Users are requested to conduct necessary tests before use.
Series of electroplated surface stone plastic ink two-component type
Series of inks are formulated with special resins, ultra-fine pigments and fillers. This product has delicate colors, excellent leveling and printing properties, and is particularly ideal for post-processing adaptability, such as stamping, drilling, cutting, etc. The coating is alcohol-resistant, chemical solvent-resistant, and steam-resistant.
Recommended applications: hardened, hardened, painted surfaces, electroplated surfaces, metal materials, stones, marbles, glass window screens, mobile phone buttons, mobile phone cases, etc.
Operation suggestions: Clean with treatment liquid before printing Make sure the printed surface is dust-free and grease-free. Dilute the product to the required consistency with 3- (adjust the ink drying speed, you can add an appropriate amount of or) - (to the total amount) activator, and mix it thoroughly with the ink. print. , suitable for mesh to
Drying: natural air drying, to 1 hour or -℃ drying, about 10 minutes.
Cleaning: Clean solvent can effectively wash off the ink on the mesh. It also has an environmental protection effect.
Color packaging: There are more than a variety of colors to choose from, and professional color matching and packaging are kilograms/cans, kilograms/barrels, and kilograms/barrels
Special reminder: The technical parameters of this information are measured under the conditions of our company. However, since the conditions and methods of using our products are beyond our control, we cannot guarantee or guarantee the technical parameters and suggestions provided, and our company is not responsible for possible losses and damages. Users are requested to conduct necessary tests before use.
The series of inks are treatment-free
The series of inks are single-component screen printing inks that use special resins and are developed for printing on untreated polypropylene surfaces. They can adhere to difficult materials and are not easy to deal with. It needs to be treated with fire, solvent or other methods in advance to increase the surface tension of the material. It also has high gloss, strong adhesion and special weather resistance.
Promotional use: Suitable for B, B, acrylic and other rigid plastics, untreated material surfaces such as pearlescent paper, synthetic paper, etc.
Features: A series of four-color inks have visual effects in outdoor advertising. Good, strong three-dimensional effect, strong weather resistance, it will not penetrate to the bottom of the screen even if it stays on the screen for a long time (no screen clogging or plate sticking will occur), it has excellent adhesion, anti-adhesion and good printability , high hardness, scratch resistance, friction resistance, oil resistance, alcohol resistance and excellent chemical resistance.
How to use: Use a clean cloth without edges and apply the treatment liquid to wipe the surface of the substrate to clean the grease, protective wax, etc. on the surface of the substrate. , add 3-liquid to dilute. If it dries more slowly, add extra slow-drying fluid. If you need to dry quickly, use a quick-drying agent. Suitable for mesh to.
Drying: ℃ warm drying: to minutes, air drying: to 3 minutes
Plate cleaning: Clean solvent can effectively wash away the ink on the mesh, and it also has an environmental protection effect.
Color packaging: More than 6 colors to choose from, each can.
Special reminder: The technical parameters in this information were measured under the conditions of our company. However, since the conditions and methods of using our products are beyond our control, we cannot guarantee or guarantee the technical parameters and suggestions provided, and our company is not responsible for possible losses and damages. Users are requested to conduct necessary tests before use.
A series of sand-resistant and solvent-resistant two-component inks
A series of inks are formulated with resins with excellent hydrophobicity and high-quality pigments and fillers. This product has excellent adhesion, high covering power, very good softness of the coating, strong tensile resistance, resistance to dry sanding, solvent resistance (gasoline, anti-white water, ketones, lipids, etc.), folding resistance, and salt resistance. Fog, weather resistance and yellowing resistance, etc.
Recommended applications:, (br),,,, leather items, feel rubber, etc. Suitable for fabric materials such as polyester materials, waterproof nylon, Oxford cloth, cool, canvas, nylon sports bags and other clothing brands such as tape , satin ribbons, webbing, etc.
Characteristics:, all indicators are in line with European and American testing standards, bright color, good softness, excellent adhesion (washing fastness level or above), good anti-adhesion and printability , Excellent printing workability, no ink diffusion or pinholes will occur.
Operation suggestions: Clean the print surface with treatment liquid before printing to make sure it is free of dust and impurities. Use 3- to dilute the product to the required consistency before printing (adjust the ink drying speed, you can use an appropriate amount of or) An activator can be added to effectively improve film adhesion and other properties. , suitable for mesh to.
Drying: Natural air drying for 3 minutes, or drying at ℃ for about 10 minutes (without adding activator). Natural air drying for - 1 hour, or drying at ℃ for about 10 minutes (with activator added).
Cleaning: Clean solvent can effectively wash off the ink on the mesh. It also has an environmental protection effect.
Color packaging: There are more than a variety of colors to choose from, and professional color matching and packaging are kilograms/cans, kilograms/barrels, and kilograms/barrels
Special reminder: The technical parameters of this information are measured under the conditions of our company. However, since the conditions and methods of using our products are beyond our control, we cannot guarantee or guarantee the technical parameters and suggestions provided, and our company is not responsible for possible losses and damages. Users are requested to conduct necessary tests before use.
Metal glass ceramic high temperature ink and electroplating surface UV surface ink and PP treatment-free ink